Author name: synergyautomatics

There are general 2 main types of bore wells that are distinguished by the diameter of the bore hole. They are commonly known as bore well and bore hole. Bore wells are constructed when low yielding ground water sources are found close to the surface, that is, usually lesser than 30 meters. They are also […]

In India, the geological department or the Central Ground Water Board should be contacted as and when the proposal for deep tube wells is made. Generally, if the normal water table is at a greater depth it would be economical as well as preferable to install a deep tube well instead of an open well.

Bore wells have always been a primary source of water in India for many decades. In areas that it is very difficult or not economic to transfer portable water, bore wells act as a sustainable source of water. Bore wells go deep into the earth such that the pipes that are laid out for drawing

In an aquifer is of slits and sands, the bore well is generally provided with a filter pack. However if an aquifer has gravelly sands, gravel grains of size to which 10 percent of the formation material is fine or sandy gravel the gravel pack is not provided with and such wells can be naturally

What is bore well water? Bore water which is also commonly known as ground water is amongst the most common source of water that is used in India. This bare well water is generally rainwater that gets absorbed by the ground and seeps into the layers of earth. It gets trapped within the layers of

Water demand for an increasing population has to be met from a suitable source. This source should be able to suffice the requirements in term of quantity as well as quality of water. The usual sources for supply of water such as rivers, lakes, ponds and canals have their own arrangement of collecting water that